16.1 Air Pollution and Its
Control
16.2 Water Pollution and Its
Control
16.3 Solid Wastes
16.4 Agro-chemicals and
their Effects
16.5 Radioactive Wastes
16.6 Greenhouse Effect and
Global Warming
16.7 Ozone Depletion in the
Stratosphere
16.8 Degradation by Improper
Resource Utilisation and
Maintenance
16.9 Deforestation
Human population size has grown enormously over the
last hundred years. This means increase in demand for
food, water, home, electricity, roads, automobiles and
numerous other commodities. These demands are exerting
tremendous pressure on our natural resources, and are
also contributing to pollution of air, water and soil. The
need of the hour is to check the degradation and depletion
of our precious natural resources and pollution without
halting the process of development.
Pollution is any undesirable change in physical,
chemical or biological characteristics of air, land, water or
soil. Agents that bring about such an undesirable change
are called as pollutants. In order to control environmental
pollution, the Government of India has passed the
Environment (Protection) Act, 1986 to protect
and improve the quality of our environment (air, water
and soil).
16.1 AIR POLLUTION AND ITS CONTROL
We are dependent on air for our respiratory needs. Air
pollutants cause injury to all living organisms. They
reduce growth and yield of crops and cause premature
death of plants. Air pollutants also deleteriously affect the
respiratory system of humans and of animals. Harmful
effects depend on the concentration of pollutants, duration of exposure
and the organism.
Smokestacks of thermal power plants, smelters and other industries
release particulate and gaseous air pollutants together with harmless
gases, such as nitrogen, oxygen, etc. These pollutants must be separated/
filtered out before releasing the harmless gases into the atmosphere.
There are several ways of removing particulate matter; the most widely
used of which is the electrostatic precipitator (Figure 16.1), which can
remove over 99 per cent particulate matter present in the exhaust from a
thermal power plant. It has electrode wires that are maintained at several
thousand volts, which produce a corona that releases electrons. These
electrons attach to dust particles giving them a net negative charge. The
collecting plates are grounded and attract the charged dust particles.
The velocity of air between the plates must be low enough to allow the
dust to fall. A scrubber (Figure 16.1) can remove gases like sulphur
dioxide. In a scrubber, the exhaust is passed through a spray of water or
lime. Recently we have realised the dangers of particulate matter that are
very very small and are not removed by these precipitators. According to
Central Pollution Control Board (CPCB), particulate size 2.5 micrometers
or less in diameter (PM 2.5) are responsible for causing the greatest harm
to human health. These fine particulates can be inhaled deep into the
lungs and can cause breathing and respiratory symptoms, irritation,
inflammations and damage to the lungs and premature deaths.
Automobiles are a major cause for atmospheric pollution atleast in
the metro cities. As the number of vehicles increase on the streets, this
problem is now shifting to the other cities too. Proper maintenance of
automobiles along with use of lead-free petrol or diesel can reduce the
pollutants they emit. Catalytic converters, having expensive metals namely
platinum-palladium and rhodium as the catalysts, are fitted into
automobiles for reducing emission of poisonous gases. As the exhaust
passes through the catalytic converter, unburnt hydrocarbons are
converted into carbon dioxide and water, and carbon monoxide and nitric
oxide are changed to carbon dioxide and nitrogen gas, respectively. Motor
vehicles equipped with catalytic converter should use unleaded petrol
because lead in the petrol inactivates the catalyst.
In India, the Air (Prevention and Control of Pollution) Act came
into force in 1981, but was amended in 1987 to include noise as an air
pollutant. Noise is undesired high level of sound. We have got used to
associating loud sounds with pleasure and entertainment not realising
that noise causes psychological and physiological disorders in humans.
The bigger the city, the bigger the function, the greater the noise!! A
brief exposure to extremely high sound level, 150 dB or more generated
by take off of a jet plane or rocket, may damage ear drums thus
permanently impairing hearing ability. Even chronic exposure to a
relatively lower noise level of cities may permanently damage hearing
abilities of humans. Noise also causes sleeplessness, increased heart
beat, altered breathing pattern, thus considerably stressing humans.
Considering the many dangerous effects of noise pollution can you
identify the unnecessary sources of noise pollution around you which
can be reduced immediately without any financial loss to anybody?
Reduction of noise in our industries can be affected by use of sound-
absorbent materials or by muffling noise. Stringent following of laws laid
down in relation to noise like delimitation of horn-free zones around
hospitals and schools, permissible sound-levels of crackers and of loud-
speakers, timings after which loudspeakers cannot be played, etc., need
to be enforced to protect ourselves from noise pollution.
16.1.1 Controlling Vehicular Air Pollution: A Case
Study of Delhi
With its very large population of vehicular traffic, Delhi leads the coun-
try in its levels of air-pollution – it has more cars than the states of
Gujarat and West Bengal put together. In the 1990s, Delhi ranked
fourth among the 41 most polluted cities of the world. Air pollution
problems in Delhi became so serious that a public interest litigation
(PIL) was filed in the Supreme Court of India. After being censured very
strongly by the Supreme Court, under its directives, the government
was asked to take, within a specified time period, appropriate meas-
ures, including switching over the entire fleet of public transport, i.e.,
buses, from diesel to compressed natural gas (CNG). All the buses of
Delhi were converted to run on CNG by the end of 2002. You may ask
the question as to why CNG is better than diesel. The answer is that
CNG burns most efficiently, unlike petrol or diesel, in the automobiles
and very little of it is left unburnt. Moreover, CNG is cheaper than petrol
or diesel, cannot be siphoned off by thieves and adulterated like petrol
or diesel. The main problem with switching over to CNG is the difficulty
of laying down pipelines to deliver CNG through distribution points/
pumps and ensuring uninterrupted supply. Simultaneously parallel
steps taken in Delhi for reducing vehicular pollution include phasing
out of old vehicles, use of unleaded petrol, use of low-sulphur petrol
and diesel, use of catalytic converters in vehicles, application of stringent
pollution-level norms for vehicles, etc.
The Government of India through a new auto fuel policy has laid
out a roadmap to cut down vehicular pollution in Indian cities. More
stringent norms for fuels means steadily reducing the sulphur and
aromatic content in petrol and diesel fuels. Euro III norms, for example,
stipulate that sulphur be controlled at 350 parts-per-million (ppm) in
diesel and 150 ppm in petrol. Aromatic hydrocarbons are to be contained
at 42 per cent of the concerned fuel. The goal, according to the roadmap,
is to reduce sulphur to 50 ppm in petrol and diesel and bring down the
level to 35 per cent. Corresponding to the fuel, vehicle engines will also
need to be upgraded.
Mass Emission Standards (Bharat Stage II which is equivalent to
Euro-II norms) are no more applicable in any of the cities of India.
Details of the latest Mass Emission Standards in India are provided
below (Table 16.1)
Thanks to the efforts made, the air quality of Delhi has significantly
improved. According to an estimate, a substantial fall in CO2
and SO2
level has been found in Delhi between 1997 and 2005.
16.2 WATER POLLUTION AND ITS CONTROL
Human beings have been abusing the water-bodies around the world by
disposing into them all kinds of waste. We tend to believe that water can
wash away everything not taking cognizance of the fact that the water
bodies are our lifeline as well as that of all other living organisms. Can
you list what all we tend to try and wash away through our rivers and
drains? Due to such activities of human kind, the ponds, lakes, stream,
rivers, estuaries and oceans are becoming polluted in several parts of the
world. Realising the importance of maintaining the cleanliness of the water
bodies, the Government of India has passed the Water (Prevention and
Control of Pollution) Act, 1974 to safeguard our water resources.
116.2.1 Domestic Sewage and Industrial EffluentsAs we work with water in our homes in the cities and towns, we washeverything into drains. Have youever wondered where the sewagethat comes out of our houses go?What happens in villages? Is thesewage treated before beingtransported to the nearest riverand mixed with it? A mere 0.1per cent impurities makedomestic sewage unfit for humanuse (Figure 16.2). You have readabout sewage treatmentplants in Chapter 10. Solids arerelatively easy to remove, whatis most difficult to remove are
dissolved salts such as nitrates, phosphates, and other nutrients, and
toxic metal ions and organic compounds. Domestic sewage primarily
contains biodegradable organic matter, which readily decomposes –
thanks to bacteria and other micro-organisms, which can multiply using
these organic substances as substrates and hence utilise some of the
components of sewage. It is possible to estimate the amount of
biodegradable organic matter in sewage water by measuring Biochemical
Oxygen Demand (BOD). Can you explain how? In the chapter on micro-
organisms you have read about the relation between BOD, micro-
organisms and the amount of biodegradable matter.
Figure 16.3 shows some of the changes that one may notice following
discharge of sewage into a river. Micro-organisms involved in
biodegradation of organic matter in the receiving water body consume a
lot of oxygen, and as a result there is a sharp decline in dissolved oxygen
downstream from the point of sewage discharge. This causes mortality of
fish and other aquatic creatures.
Presence of large amounts of nutrients in waters also causes excessive
growth of planktonic (free-floating) algae, called an algal bloom
(Figure 16.4) which imparts a distinct colour to the water bodies. Algal
blooms cause deterioration of the water quality and fish mortality. Some
bloom-forming algae are extremely toxic to human beings and animals.
You may have seen the beautiful mauve-colored flowers found on
very appealingly-shaped floating plants in water bodies. These plants
which were introduced into India for their lovely flowers have caused havoc
by their excessive growth by causing blocks in our waterways. They grow
faster than our ability to remove them. These are plants of water hyacinth
(Eichhornia crassipes), the world’s most problematic aquatic weed, also
called ‘Terror of Bengal’. They grow abundantly in
eutrophic water bodies, and lead to an imbalance in the
ecosystem dynamics of the water body.
Sewage from our homes as well as from hospitals are
likely to contain many undesirable pathogenic micro-
organisms, and its disposal into a water without proper
treatment may cause outbreak of serious diseases, such
as, dysentery, typhoid, jaundice, cholera, etc.
Unlike domestic sewage, waste water from industries
like petroleum, paper manufacturing, metal extraction and
processing, chemical manufacturing, etc., often contain
toxic substances, notably, heavy metals (defined as
elements with density > 5 g/cm3
such as mercury,
cadmium, copper, lead, etc.) and a variety of organic
compounds.
A few toxic substances, often present in industrial
waste waters, can undergo biological magnification
(Biomagnification) in the aquatic food chain.
Biomagnification refers to increase in concentration of
the toxicant at successive trophic levels. This happens
because a toxic substance accumulated by an organism
cannot be metabolised or excreted, and is thus passed on
to the next higher trophic level. This phenomenon is well-
known for mercury and DDT. Figure 16.5 shows
biomagnification of DDT in an aquatic food chain. In this
manner, the concentration of DDT is increased at
successive trophic levels; say if it starts at 0.003 ppb
(ppb = parts per billion) in water, it can ultimately reach
25 ppm (ppm = parts per million) in fish-eating birds,
through biomagnification. High concentrations of DDT
disturb calcium metabolism in birds, which causes
thinning of eggshell and their premature breaking,
eventually causing decline in bird populations.
Eutrophication is the natural aging of a lake by
nutrient enrichment of its water. In a young lake the water is cold and
clear, supporting little life. With time, streams draining into the lake
introduce nutrients such as nitrogen and phosphorus, which encourage
the growth of aquatic organisms. As the lake’s fertility increases, plant
and animal life burgeons, and organic remains begin to be deposited on
the lake bottom. Over the centuries, as silt and organic debris pile up, the
lake grows shallower and warmer, with warm-water organisms
supplanting those that thrive in a cold environment. Marsh plants take
root in the shallows and begin to fill in the original lake basin. Eventually,
the lake gives way to large masses of floating plants (bog), finally converting
into land. Depending on climate, size of the lake and other factors, the
natural aging of a lake may span thousands of years. However, pollutants
from man’s activities like effluents from the industries and homes can
radically accelerate the aging process. This phenomenon has been called
Cultural or Accelerated Eutrophication. During the past century, lakes
in many parts of the earth have been severely eutrophied by sewage and
agricultural and industrial wastes. The prime contaminants are nitrates
and phosphates, which act as plant nutrients. They overstimulate the
growth of algae, causing unsightly scum and unpleasant odours, and
robbing the water of dissolved oxygen vital to other aquatic life. At the
same time, other pollutants flowing into a lake may poison whole
populations of fish, whose decomposing remains further deplete the
water’s dissolved oxygen content. In such fashion, a lake can literally
choke to death.
Heated (thermal) wastewaters flowing out of electricity-generating units,
e.g., thermal power plants, constitute another important category of
pollutants. Thermal wastewater eliminates or reduces the number of
organisms sensitive to high temperature, and may enhance the growth of
plants and fish in extremely cold areas but, only after causing damage to
the indigenous flora and fauna.
16.2.2 A Case Study of Integrated Waste Water Treatment
Wastewater including sewage can be treated in an integrated manner, by
utilising a mix of artificial and natural processes. An example of such an
initiative is the town of Arcata, situated along the northern coast of
California. Collaborating with biologists from the Humboldt
State University, the townspeople created an integrated waste water
treatment process within a natural system. The cleaning occurs in two
stages – (a) the conventional sedimentation, filtering and chlorine
treatments are given. After this stage, lots of dangerous pollutants like
dissolved heavy metals still remain. To combat this, an innovative
approach was taken and (b) the biologists developed a series of six
connected marshes over 60 hectares of marshland. Appropriate plants,
algae, fungi and bacteria were seeded into this area, which neutralise,
absorb and assimilate the pollutants. Hence, as the water flows through
the marshes, it gets purified naturally.
The marshes also constitute a sanctuary, with a high level of
biodiversity in the form of fishes, animals and birds that now reside there.
A citizens group called Friends of the Arcata Marsh (FOAM) are responsible
for the upkeep and safeguarding of this wonderful project. .
All this time, we have assumed that removal of wastes requires water,
i.e., the creation of sewage. But what if water is not necessary to dispose
off human waste, like excreta? Can you imagine the amount of water that
one can save if one didn’t have to flush the toilet? Well, this is already a
reality. Ecological sanitation is a sustainable system for handling human
excreta, using dry composting toilets. This is a practical, hygienic, efficient
and cost-effective solution to human waste disposal. The key point to
note here is that with this composting method, human excreta can be
recycled into a resource (as natural fertiliser), which reduces the need for
chemical fertilisers. There are working ‘EcoSan’ toilets in many areas of
Kerala and Sri Lanka.
16.3 SOLID WASTES
Solid wastes refer to everything that goes out in trash. Municipal solid
wastes are wastes from homes, offices, stores, schools, hospitals, etc.,
that are collected and disposed by the municipality. The municipal solid
wastes generally comprise paper, food wastes, plastics, glass, metals,
rubber, leather, textile, etc. Burning reduces the volume of the wastes,
although it is generally not burnt to completion and open dumps often
serve as the breeding ground for rats and flies. Sanitary landfills were
adopted as the substitute for open-burning dumps. In a sanitary landfill,
wastes are dumped in a depression or trench after compaction, and
covered with dirt everyday. If you live in a town or city, do you know
where the nearest landfill site is? Landfills are also not really much of a
solution since the amount of garbage generation specially in the metros
has increased so much that these sites are getting filled too. Also there
is danger of seepage of chemicals, etc., from these landfills polluting the
underground water resources.
A solution to all this can only be in human beings becoming more
sensitive to these environment issues. All waste that we generate can
be categorised into three types – (a) bio-degradable, (b) recyclable and
(c) the non-biodegradable. It is important that all garbage generated is
sorted. What can be reused or recycled should be separated out; our
kabadiwallahs and rag-pickers do a great job of separation of materials
for recycling. The biodegradable materials can be put into deep pits in
the ground and be left for natural breakdown. That leaves only the non-
biodegradable to be disposed off. The need to reduce our garbage
generation should be a prime goal, instead, we are increasing the use of
non-biodegradable products. Just pick any readymade packet of any
‘good quality’ eatable, say a biscuit packet, and study the packaging –
do you see the number of protective layers used? Note that atleast one
layer is of plastic. We have started packaging even our daily use products
like milk and water in polybags!! In cities, fruits and vegetables can be
bought packed in beautiful polysterene and plastic packaging – we pay
so much and what do we do? Contribute heavily to environmental
pollution. State Governments across the country are trying to push for
reduction in use of plastics and use of eco-friendly packaging. We can do
our bit by carrying cloth or other natural fibre carry-bags when we go
shopping and by refusing polythene bags.
Hospitals generate hazardous wastes that contain disinfectants and
other harmful chemicals, and also pathogenic micro-organisms. Such
wastes also require careful treatment and disposal. The use of incinerators
is crucial to disposal of hospital waste.
Irreparable computers and other electronic goods are known as
electronic wastes (e-wastes). E-wastes are burried in landfills or
incinerated. Over half of the e-wastes generated in the developed world
are exported to developing countries, mainly to China, India and Pakistan,
where metals like copper, iron, silicon, nickel and gold are recovered
during recycling process. Unlike developed countries, which have
specifically built facilities for recycling of e-wastes, recycling in developing
countries often involves manual participation thus exposing workers to
toxic substances present in e-wastes. Recycling is the only solution for
the treatment of e-waste, provided it is carried out in an environment-
friendly manner.
16.3.1 Case Study of Remedy for Plastic Waste
A plastic sack manufacturer in Bangalore has managed to find the ideal
solution to the ever-increasing problem of accumulating plastic waste.
Ahmed Khan, aged 57 years old, has been producing plastic sacks for
20 years. About 8 years ago, he realised that plastic waste was a real
problem. Polyblend, a fine powder of recycled modified plastic, was
developed then by his company. This mixture is mixed with the bitumen
that is used to lay roads. In collaboration with R.V.College of Engineering
and the Bangalore City Corporation, Ahmed Khan proved that blends of
Polyblend and bitumen, when used to lay roads, enhanced the bitumen’s
water repellant properties, and helped to increase road life by a factor of
three. The raw material for creating Polyblend is any plastic film waste.
So, against the price of Rs. 0.40 per kg that rag pickers had been getting
for plastic waste, Khan now offers Rs.6. Using Khan’s technique, by the
year 2002, more than 40 kms of road in Bangalore has already been
laid. At this rate, Khan will soon be running short of plastic waste in
Bangalore, to produce Polyblend. Thanks to innovations like Polyblend,
we might still avoid being smothered by plastic waste.
16.4 AGRO-CHEMICALS AND THEIR EFFECTS
In the wake of green revolution, use of inorganic fertilisers and pesticides
has increased manifold for enhancing crop production. Pesticides,
herbicides, fungicides, etc., are being increasingly used. These incidentally,
are also toxic to non-target organisms,that are important components of
the soil ecosystem. Do you think these can be biomagnified in the terrestrial
ecosystems? We know what the addition of increasing amounts of
chemical fertilisers can do to aquatic ecosystems vis-à-vis eutrophication.
The current problems in agriculture are, therefore, extremely grave.
16.4.1 Case Study of Organic Farming
Integrated organic farming is a cyclical, zero-waste procedure, where waste
products from one process are cycled in as nutrients for other processes.
This allows the maximum utilisation of resource and increases the
efficiency of production. Ramesh Chandra Dagar, a farmer in Sonipat,
Haryana, is doing just this. He includes bee-keeping, dairy management,
water harvesting, composting and agriculture in a chain of processes,
which support each other and allow an extremely economical and
sustainable venture. There is no need to use chemical fertilisers for crops,
as cattle excreta (dung) are used as manure. Crop waste is used to create
compost, which can be used as a natural fertiliser or can be used to
generate natural gas for satisfying the energy needs of the farm.
Enthusiastic about spreading information and help on the practice of
integrated organic farming, Dagar has created the Haryana Kisan Welfare
Club, with a current membership of 5000 farmers.
16.5 RADIOACTIVE WASTES
Initially, nuclear energy was hailed as a non-polluting way for generating
electricity. Later on, it was realised that the use of nuclear energy has two
very serious inherent problems. The first is accidental leakage, as occurred
in the Three Mile Island and Chernobyl incidents and the second is safe
disposal of radioactive wastes.
Radiation, that is given off by nuclear waste is extremely damaging to
organisms, because it causes mutations at a very high rate. At high doses,
nuclear radiation is lethal but at lower doses, it creates various disorders,
the most frequent of all being cancer. Therefore, nuclear waste is an
extremely potent pollutant and has to be dealt with utmost caution.
It has been recommended that storage of nuclear waste, after
sufficient pre-treatment, should be done in suitably shielded
containers buried within the rocks, about 500 m deep below the
earth’s surface. However, this method of disposal is meeting stiff
opposition from the public. Why do you think this method of
disposal is not agreeable to many people?
16.6 GREENHOUSE EFFECT AND GLOBAL WARMING
The term ‘Greenhouse effect’ has been derived from a phenomenon that
occurs in a greenhouse. Have you ever seen a greenhouse? It looks like a
small glass house and is used for growing plants especially during winter.
In a greenhouse the glass panel lets the light in, but does not allow heat
to escape. Therefore, the greenhouse warms up, very much like inside a
car that has been parked in the sun for a few hours.
The greenhouse effect is a naturally occurring phenomenon that is
responsible for heating of Earth’s surface and atmosphere. You would be
surprised to know that without greenhouse effect the average temperature
at surface of Earth would have been a chilly –18oC rather than the present
average of 15oC. In order to understand the
greenhouse effect, it is necessary to know the
fate of the energy of sunlight that reaches the
outermost atmosphere (Figure16.6). Clouds
and gases reflect about one-fourth of the
incoming solar radiation, and absorb some of
it but almost half of incoming solar radiation
falls on Earth’s surface heating it, while a small
proportion is reflected back. Earth’s surface
re-emits heat in the form of infrared radiation
but part of this does not escape into space as
atmospheric gases (e.g., carbon dioxide,
methane, etc.) absorb a major fraction of it. The
molecules of these gases radiate heat energy,
and a major part of which again comes to
Earth’s surface, thus heating it up once again.
This cycle is repeated many a times. The
above-mentioned gases – carbon dioxide and methane – are commonly
known as greenhouse gases (Figure 16.7) because they are responsible
for the greenhouse effect.
Increase in the level of greenhouse gases has led to considerable heating
of Earth leading to global warming. During the past century, the
temperature of Earth has increased by 0.6°C, most of it during the last
three decades. Scientists believe that this rise in temperature is leading
to deleterious changes in the environment and resulting in odd climatic
changes (e.g. El Nino effect) , thus leading to increased melting of polar
ice caps as well as of other places like the Himalayan snow caps. Over
many years, this will result in a rise in sea level that can submerge many
coastal areas. The total spectrum of changes that global warming can
bring about is a subject that is still under active research.
How can we control global warming? The measures include cutting
down use of fossil fuel, improving efficiency of energy usage, reducing
deforestation, planting trees and slowing down the growth of human
population. International initiatives are also being taken to reduce the
emission of greenhouse gases into the atmosphere.
16.7 OZONE DEPLETION IN THE STRATO-
SPHERE
You have earlier studied in the Chemistry
textbook of Class XI about ‘bad’ ozone, formed
in the lower atmosphere (troposphere) that harms
plants and animals. There is ‘good’ ozone also;
this ozone is found in the upper part of the
atmosphere called the stratosphere, and it acts
as a shield absorbing ultraviolet radiation from
the sun. UV rays are highly injurious to living
organisms since DNA and proteins of living
organisms preferentially absorb UV rays, and its
high energy breaks the chemical bonds within
these molecules. The thickness of the ozone in a
column of air from the ground to the top of the
atmosphere is measured in terms of Dobson
units (DU).
Ozone gas is continuously formed by the
action of UV rays on molecular oxygen, and also
degraded into molecular oxygen in the
stratosphere. There should be a balance between
production and degradation of ozone in the
stratosphere. Of late, the balance has been
disrupted due to enhancement of ozone
degradation by chlorofluorocarbons (CFCs).
CFCs find wide use as refrigerants. CFCs discharged in the lower part of
atmosphere move upward and reach stratosphere. In stratosphere, UV
rays act on them releasing Cl atoms. Cl degrades ozone releasing
molecular oxygen, with these atoms acting merely as catalysts; Cl atoms
are not consumed in the reaction. Hence, whatever CFCs are added to
the stratosphere, they have permanent and continuing effects on Ozone
levels. Although ozone depletion is occurring widely in the stratosphere,
the depletion is particularly marked over the Antarctic region. This has
resulted in formation of a large area of thinned ozone layer, commonly
called as the ozone hole (Figure 16.8).
UV radiation of wavelengths shorter than UV-B, are almost completely
absorbed by Earth’s atmosphere, given that the ozone layer is intact. But,
UV-B damages DNA and mutation may occur. It causes aging of skin,
damage to skin cells and various types of skin cancers. In human eye,
cornea absorbs UV-B radiation, and a high dose of UV-B causes
inflammation of cornea, called snow-blindness, cataract, etc. Such
exposure may permanently damage the cornea.
Recognising the deleterious affects of ozone depletion, an international
treaty, known as the Montreal Protocol, was signed at Montreal (Canada)
in 1987 (effective in 1989) to control the emission of ozone depleting
substances. Subsequently many more efforts have been made and
protocols have laid down definite roadmaps, separately for developed and
developing countries, for reducing the emission of CFCs and other ozone
depleting chemicals.
16.8 DEGRADATION BY IMPROPER RESOURCE UTILISATION
AND MAINTENANCE
The degradation of natural resources can occur, not just by the action of
pollutants but also by improper resource utilisation practices.
Soil erosion and desertification: The development of the fertile top-soil
takes centuries. But, it can be removed very easily due to human activities
like over-cultivation, unrestricted grazing, deforestation and poor
irrigation practices, resulting in arid patches of land. When large barren
patches extend and meet over time, a desert is created. Internationally, it
has been recognised that desertification is a major problem nowadays,
particularly due to increased urbanisation.
Waterlogging and soil salinity: Irrigation without proper drainage of
water leads to waterlogging in the soil. Besides affecting the crops,
waterlogging draws salt to the surface of the soil. The salt then is deposited
as a thin crust on the land surface or starts collecting at the roots of the
plants. This increased salt content is inimical to the growth of crops and
is extremely damaging to agriculture. Waterlogging and soil salinity are
some of the problems that have come in the wake of the Green Revolution.
16.9 DEFORESTATION
Deforestation is the conversion of forested areas to non-forested ones.
According to an estimate, almost 40 per cent forests have been lost in the
tropics, compared to only 1 per cent in the temperate region. The present
scenario of deforestation is particularly grim in India. At the beginning of
the twentieth century, forests covered about 30 per cent of the land of
India. By the end of the century, it shrunk to 21.54 per cent, whereas the
National Forest Policy (1988) of India has recommended 33 per cent forest
cover for the plains and 67 per cent for the hills.
How does deforestation occur? A number of human activities
contribute to it. One of the major reasons is the conversion of forest to
agricultural land so as to feed the growing human population. Trees are
axed for timber, firewood, cattle ranching and for several other purposes.
Slash and burn agriculture, commonly called as Jhum cultivation in
the north-eastern states of India, has also contributed to deforestation.
In slash and burn agriculture, the farmers cut down the trees of the forest
and burn the plant remains. The ash is used as a fertiliser and the land is
then used for farming or cattle grazing. After cultivation, the area is left
for several years so as to allow its recovery. The farmers then move on to
other areas and repeat this process. In earlier days, when Jhum cultivation
was in prevalence, enough time-gap was given so that the land recovered
from the effect of cultivation. With increasing population, and repeated
cultivation, this recovery phase is done away with, resulting in
deforestation.
What are the consequences of deforestation? One of the major effects
is enhanced carbon dioxide concentration in the atmosphere because
trees that could hold a lot of carbon in their biomass are lost with
deforestation. Deforestation also causes loss of biodiversity due to habitat
destruction, disturbs hydrologic cycle, causes soil erosion, and may lead
to desertification in extreme cases.
Reforestation is the process of restoring a forest that once existed
but was removed at some point of time in the past. Reforestation may
occur naturally in a deforested area. However, we can speed it up by
planting trees with due consideration to biodiversity that earlier existed
in that area.
16.9.1 Case Study of People’s Participation in
Conservation of Forests
People’s participation has a long history in India. In 1731, the king of
Jodhpur in Rajasthan asked one of his ministers to arrange wood for
constructing a new palace. The minister and workers went to a forest
near a village, inhabited by Bishnois, to cut down trees. The Bishnoi
community is known for its peaceful co-existence with nature. The effort
to cut down trees by the kings was thwarted by the Bishnois. A Bishnoi
woman Amrita Devi showed exemplary courage by hugging a tree and
daring king’s men to cut her first before cutting the tree. The tree mattered
much more to her than her own life. Sadly, the king’s men did not heed to
her pleas, and cut down the tree along with Amrita Devi. Her three
daughters and hundreds of other Bishnois followed her, and thus lost
their lives saving trees. Nowhere in history do we find a commitment of
this magnitude when human beings sacrificed their lives for the cause of
the environment. The Government of India has recently instituted the
Amrita Devi Bishnoi Wildlife Protection Award for individuals or
communities from rural areas that have shown extraordinary courage
and dedication in protecting wildlife.
You may have heard of the Chipko Movement of Garhwal Himalayas.
In 1974, local women showed enormous bravery in protecting trees from
the axe of contractors by hugging them. People all over the world have
acclaimed the Chipko movement.
Realising the significance of participation by local communities,
the Government of India in 1980s has introduced the concept of
Joint Forest Management (JFM) so as to work closely with the local
communities for protecting and managing forests. In return for their
services to the forest, the communities get benefit of various forest products
(e.g., fruits, gum, rubber, medicine, etc.), and thus the forest can be
conserved in a sustainable manner.
SUMMARY
Major issues relating to environmental pollution and depletion of
valuable natural resources vary in dimension from local, regional to
global levels. Air pollution primarily results from burning of fossil fuel,
e.g., coal and petroleum, in industries and in automobiles. They are
harmful to humans, animals and plants, and therefore must be removed
to keep our air clean. Domestic sewage, the most common source of
pollution of water bodies, reduces dissolved oxygen but increases
biochemical oxygen demand of receiving water. Domestic sewage is rich
in nutrients, especially, nitrogen and phosphorus, which cause
eutrophication and nuisance creating algal blooms. Industrial waste
waters are often rich in toxic chemicals, especially heavy metals and
organic compounds. Industrial waste waters harm living organisms.
Municipal solid wastes also create problems and must be disposed off
in landfills. Disposal of hazardous wastes like defunct ships, radioactive
wastes and e-wastes requires additional efforts. Soil pollution primarily
results from agricultural chemicals (e.g., pesticides) and leachates from
solid wastes deposited over it.
Two major environmental issues of global nature are increasing
greenhouse effect, which is warming Earth, and depletion of ozone in
the stratosphere. Enhanced greenhouse effect is mainly due to
increased emission of carbon dioxide, methane, nitrous oxide and CFCs.,
and also due to deforestation. It may drastically change rainfall pattern,
global temperature, besides deleteriously affecting living organisms.
Ozone in the stratosphere, which protects us from harmful effects of
ultraviolet radiation, is depleting fast due to emission of CFCs thus
increasing the risks of skin cancer, mutation and other disorders.
EXERCISES
- What are the various constituents of domestic sewage? Discuss the
effects of sewage discharge on a river. - List all the wastes that you generate, at home, school or during your
trips to other places. Could you very easily reduce the generation of
these wastes? Which would be difficult or rather impossible to reduce? - Discuss the causes and effects of global warming. What measures need
to be taken to control global warming? - Match the items given in column A and B:
Column A Column B
(a) Catalytic converter (i) Particulate matter
(b) Electrostatic precipitator (ii) Carbon monoxide and nitrogen oxides
(c) Earmuffs (iii) High noise level
(d) Landfills (iv) Solid wastes - Write critical notes on the following:
(a) Eutrophication
(b) Biological magnification
(c) Groundwater depletion and ways for its replenishment - Why does ozone hole form over Antarctica? How will enhanced ultraviolet
radiation affect us? - Discuss the role of women and communities in protection and
conservation of forests. - What measures, as an individual, would you take to reduce
environmental pollution? - Discuss briefly the following:
(a) Radioactive wastes
(b) Defunct ships and e-wastes
(c) Municipal solid wastes - What initiatives were taken for reducing vehicular air pollution in Delhi?
Has air quality improved in Delhi? - Discuss briefly the following :
(a) Greenhouse gases
(b) Catalytic converter
(c) Ultraviolet B