explainerofficial.com

1.1 Flower – A Fascinating
Organ of Angiosperms
1.2 Pre-fertilisation : Structures
and Events
1.3 Double Fertilisation
1.4 Post-fertilisation: Structures
and Events
1.5 Apomixis and
Polyembryony

Are we not lucky that plants reproduce sexually? The
myriads of flowers that we enjoy gazing at, the scents and
the perfumes that we swoon over, the rich colours that
attract us, are all there as an aid to sexual reproduction.
Flowers do not exist only for us to be used for our own
selfishness. All flowering plants show sexual reproduction.
A look at the diversity of structures of the inflorescences,
flowers and floral parts, shows an amazing range of
adaptations to ensure formation of the end products of
sexual reproduction, the fruits and seeds. In this chapter,
let us understand the morphology, structure and the
processes of sexual reproduction in flowering plants
(angiosperms).

1.1 FLOWER – A FASCINATING ORGAN OF
ANGIOSPERMS
Human beings have had an intimate relationship with
flowers since time immemorial. Flowers are objects of
aesthetic, ornamental, social, religious and cultural value
– they have always been used as symbols for conveying
important human feelings such as love, affection,
happiness, grief, mourning, etc. List at least five flowers
of ornamental value that are commonly cultivated at

homes and in gardens. Find out the names of five more flowers that are
used in social and cultural celebrations in your family. Have you heard
of floriculture – what does it refer to?
To a biologist, flowers are morphological and embryological marvels
and the sites of sexual reproduction. In earlier classes, you have read the
various parts of a flower. Figure 1.1 will help you recall the parts of a
typical flower. Can you name the two parts in a flower in which the two
most important units of sexual reproduction develop?

1.2 PRE-FERTILISATION: STRUCTURES AND EVENTS
Much before the actual flower is seen on a plant, the decision that the plant
is going to flower has taken place. Several hormonal and structural changes
are initiated which lead to the differentiation and further development of
the floral primordium. Inflorescences are formed which bear the floral buds
and then the flowers. In the flower the male and female reproductive
structures, the androecium and the gynoecium differentiate and develop.
You would recollect that the androecium consists of a whorl of stamens
representing the male reproductive organ and the gynoecium represents
the female reproductive organ.

1.2.1 Stamen, Microsporangium and Pollen Grain
Figure 1.2a shows the two parts of a typical stamen – the long and slender
stalk called the filament, and the terminal generally bilobed structure
called the anther. The proximal end of the filament
is attached to the thalamus or the petal of the flower.
The number and length of stamens are variable in
flowers of different species. If you were to collect a
stamen each from ten flowers (each from different
species) and arrange them on a slide, you would
be able to appreciate the large variation in size seen
in nature. Careful observation of each stamen
under a dissecting microscope and making neat
diagrams would elucidate the range in shape and
attachment of anthers in different flowers.
A typical angiosperm anther is bilobed with
each lobe having two theca, i.e., they are dithecous
(Figure 1.2b). Often a longitudinal groove runs
lengthwise separating the theca. Let us
understand the various types of tissues and their
organisation in the transverse section of an anther
(Figure 1.3a). The bilobed nature of an anther is
very distinct in the transverse section of the anther.
The anther is a four-sided (tetragonal) structure
consisting of four microsporangia located at the
corners, two in each lobe.
The microsporangia develop further and
become pollen sacs. They extend longitudinally
all through the length of an anther and are packed
with pollen grains.

Structure of microsporangium: In a transverse
section, a typical microsporangium appears near
circular in outline. It is generally surrounded by four wall layers (Figure
1.3b)– the epidermis, endothecium, middle layers and the tapetum. The
outer three wall layers perform the function of protection and help in
dehiscence of anther to release the pollen. The innermost wall layer is
the tapetum. It nourishes the developing pollen grains. Cells of the
tapetum possess dense cytoplasm and generally have more than one
nucleus. Can you think of how tapetal cells could become bi-nucleate?
When the anther is young, a group of compactly arranged homogenous
cells called the sporogenous tissue occupies the centre of each
microsporangium.

Microsporogenesis : As the anther develops, the cells of the sporogenous
tissue undergo meiotic divisions to form microspore tetrads. What would
be the ploidy of the cells of the tetrad?

As each cell of the sporogenous tissue is capable of giving rise to a
microspore tetrad. Each one is a potential pollen or microspore mother
cell. The process of formation of microspores from a pollen mother cell (PMC)
through meiosis is called microsporogenesis. The microspores, as they
are formed, are arranged in a cluster of four cells–the microspore tetrad
(Figure 1.3a). As the anthers mature and dehydrate, the microspores
dissociate from each other and develop into pollen grains (Figure 1.3 b).
Inside each microsporangium several thousands of microspores or pollen
grains are formed that are released with the dehiscence of anther
(Figure 1.3c).

Pollen grain: The pollen grains represent the male gametophytes. If you
touch the opened anthers of Hibiscus or any other flower you would find
deposition of yellowish powdery pollen grains on your fingers. Sprinkle
these grains on a drop of water taken on a glass slide and observe under

a microscope. You will really be amazed at the variety of architecture –
sizes, shapes, colours, designs – seen on the pollen grains
from different species (Figure 1.4).
Pollen grains are generally spherical measuring about
25-50 micrometers in diameter. It has a prominent two-layered
wall. The hard outer layer called the exine is made up of
sporopollenin which is one of the most resistant organic material
known. It can withstand high temperatures and strong acids
and alkali. No enzyme that degrades sporopollenin is so far
known. Pollen grain exine has prominent apertures called germ
pores where sporopollenin is absent. Pollen grains are well-
preserved as fossils because of the presence of sporopollenin.
The exine exhibits a fascinating array of patterns and designs.
Why do you think the exine should be hard? What is the
function of germ pore? The inner wall of the pollen grain is
called the intine. It is a thin and continuous layer made up of
cellulose and pectin. The cytoplasm of pollen grain is
surrounded by a plasma membrane. When the pollen grain is
mature it contains two cells, the vegetative cell and generative
cell (Figure 1.5b). The vegetative cell is bigger, has abundant
food reserve and a large irregularly shaped nucleus. The
generative cell is small and floats in the cytoplasm of the
vegetative cell. It is spindle shaped with dense cytoplasm and
a nucleus. In over 60 per cent of angiosperms, pollen grains
are shed at this 2-celled stage. In the remaining species, the
generative cell divides mitotically to give rise to the two male
gametes before pollen grains are shed (3-celled stage).
Pollen grains of many species cause severe allergies and bronchial
afflictions in some people often leading to chronic respiratory
disorders– asthma, bronchitis, etc. It may be mentioned that Parthenium
or carrot grass that came into India as a contaminant with imported wheat,
has become ubiquitous in occurrence and causes pollen allergy.

Pollen grains are rich in nutrients. It has become a fashion in recent
years to use pollen tablets as food supplements. In western countries, a
large number of pollen products in the form of tablets and syrups are
available in the market. Pollen consumption has been claimed to increase
the performance of athletes and race horses (Figure 1.6).

When once they are shed, pollen grains have to land on the stigma
before they lose viability if they have to bring about fertilisation. How long
do you think the pollen grains retain viability? The period for which pollen
grains remain viable is highly variable and to some extent depends on the
prevailing temperature and humidity. In some cereals such as rice and
wheat, pollen grains lose viability within 30 minutes of their release, and
in some members of Rosaceae, Leguminoseae and Solanaceae, they
maintain viability for months. You may have heard of storing semen/
sperms of many animals including humans for artificial insemination. It
is possible to store pollen grains of a large number of species for years in
liquid nitrogen (-1960C). Such stored pollen can be used as pollen banks,
similar to seed banks, in crop breeding programmes.

1.2.2 The Pistil, Megasporangium (ovule) and Embryo sac
The gynoecium represents the female reproductive part of the flower. The
gynoecium may consist of a single pistil (monocarpellary) or may have
more than one pistil (multicarpellary). When there are more than one,
the pistils may be fused together (syncarpous) (Figure 1.7b) or may be
free (apocarpous) (Figure 1.7c). Each pistil has three parts (Figure 1.7a),
the stigma, style and ovary. The stigma serves as a landing platform
for pollen grains. The style is the elongated slender part beneath the
stigma. The basal bulged part of the pistil is the ovary. Inside the ovary
is the ovarian cavity (locule). The placenta is located inside the ovarian
cavity. Recall the definition and types of placentation that you studied in

Class XI. Arising from the placenta are the megasporangia, commonly
called ovules. The number of ovules in an ovary may be one (wheat,
paddy, mango) to many (papaya, water melon, orchids).
The Megasporangium (Ovule) : Let us familiarise ourselves with the
structure of a typical angiosperm ovule (Figure 1.7d). The ovule is a small
structure attached to the placenta by means of a stalk called funicle.
The body of the ovule fuses with funicle in the region called hilum. Thus,
hilum represents the junction between ovule and funicle. Each ovule has
one or two protective envelopes called integuments. Integuments encircle
the nucellus except at the tip where a small opening called the micropyle
is organised. Opposite the micropylar end, is the chalaza, representing
the basal part of the ovule.
Enclosed within the integuments is a mass of cells called the nucellus.
Cells of the nucellus have abundant reserve food materials. Located in the
nucellus is the embryo sac or female gametophyte. An ovule generally has
a single embryo sac formed from a megaspore.
Megasporogenesis : The process of formation of megaspores from the
megaspore mother cell is called megasporogenesis. Ovules generally
differentiate a single megaspore mother cell (MMC) in the micropylar region

of the nucellus. It is a large cell containing dense cytoplasm and a
prominent nucleus. The MMC undergoes meiotic division. What is the
importance of the MMC undergoing meiosis? Meiosis results in the
production of four megaspores (Figure 1.8a).
Female gametophyte : In a majority of flowering plants, one of the
megaspores is functional while the other three degenerate. Only the
functional megaspore develops into the female gametophyte (embryo
sac). This method of embryo sac formation from a single megaspore is termed
monosporic development. What will be the ploidy of the cells of the nucellus,
MMC, the functional megaspore and female gametophyte?

Let us study about the formation of the embryo sac in detail.
(Figure 1.8b). The nucleus of the functional megaspore divides mitotically
to form two nuclei which move to the opposite poles, forming the 2-
nucleate embryo sac. Two more sequential mitotic nuclear divisions
result in the formation of the 4-nucleate and later the 8-nucleate stages
of the embryo sac. It is of interest to note that these mitotic divisions are
strictly free nuclear, that is, nuclear divisions are not followed immediately
by cell wall formation. After the 8-nucleate stage, cell walls are laid down
leading to the organisation of the typical female gametophyte
or embryo sac. Observe the distribution of cells inside the embryo sac
(Figure 1.8b, c). Six of the eight nuclei are surrounded by cell walls and
organised into cells; the remaining two nuclei, called polar nuclei are
situated below the egg apparatus in the large central cell.
There is a characteristic distribution of the cells within the embryo
sac. Three cells are grouped together at the micropylar end and constitute
the egg apparatus. The egg apparatus, in turn, consists of two synergids
and one egg cell. The synergids have special cellular thickenings at the
micropylar tip called filiform apparatus, which play an important role in
guiding the pollen tubes into the synergid. Three cells are at the chalazal
end and are called the antipodals. The large central cell, as mentioned
earlier, has two polar nuclei. Thus, a typical angiosperm embryo sac, at
maturity, though 8-nucleate is 7-celled.

1.2.3 Pollination
In the preceding sections you have learnt that the male and female gametes
in flowering plants are produced in the pollen grain and embryo sac,
respectively. As both types of gametes are non-motile, they have to be
brought together for fertilisation to occur. How is this achieved?
Pollination is the mechanism to achieve this objective. Transfer
of pollen grains (shed from the anther) to the stigma of a pistil is
termed pollination. Flowering plants have evolved an amazing array
of adaptations to achieve pollination. They make use of external
agents to achieve pollination. Can you list the possible external
agents?

Kinds of Pollination : Depending on the source of pollen, pollination
can be divided into three types.

(i) Autogamy : In this type, pollination is achieved within the same
flower. Transfer of pollen grains from the anther to the stigma of the
same flower (Figure 1.9a). In a normal flower which opens and
exposes the anthers and the stigma, complete autogamy is rather
rare. Autogamy in such flowers requires synchrony in pollen release
and stigma receptivity and also, the anthers and the stigma should

lie close to each other so that self-pollination
can occur. Some plants such as Viola
(common pansy), Oxalis, and Commelina
produce two types of flowers –
chasmogamous flowers which are similar to
flowers of other species with exposed anthers
and stigma, and cleistogamous flowers which
do not open at all (Figure 1.9c). In such flowers,
the anthers and stigma lie close to each other.
When anthers dehisce in the flower buds,
pollen grains come in contact with the stigma
to effect pollination. Thus, cleistogamous
flowers are invariably autogamous as there is
no chance of cross-pollen landing on the
stigma. Cleistogamous flowers produce
assured seed-set even in the absence of
pollinators. Do you think that cleistogamy is
advantageous or disadvantageous to the
plant? Why?

(ii) Geitonogamy – Transfer of pollen grains from
the anther to the stigma of another flower of
the same plant. Although geitonogamy is
functionally cross-pollination involving a
pollinating agent, genetically it is similar to
autogamy since the pollen grains come from
the same plant.

(iii) Xenogamy – Transfer of pollen grains from
anther to the stigma of a different plant (Figure
1.9b). This is the only type of pollination which
during pollination brings genetically different
types of pollen grains to the stigma.

Agents of Pollination : Plants use two abiotic (wind
and water) and one biotic (animals) agents to achieve
pollination. Majority of plants use biotic agents for
pollination. Only a small proportion of plants use
abiotic agents. Pollen grains coming in contact with
the stigma is a chance factor in both wind and water
pollination. To compensate for this uncertainties and
associated loss of pollen grains, the flowers produce
enormous amount of pollen when compared to the
number of ovules available for pollination.

Pollination by wind is more common
amongst abiotic pollinations. Wind pollination
also requires that the pollen grains are light
and non-sticky so that they can be
transported in wind currents. They often
possess well-exposed stamens (so that the
pollens are easily dispersed into wind currents,
Figure 1.10) and large often-feathery stigma
to easily trap air-borne pollen grains. Wind-
pollinated flowers often have a single ovule in
each ovary and numerous flowers packed into
an inflorescence; a familiar example is the corn
cob – the tassels you see are nothing but the
stigma and style which wave in the wind to
trap pollen grains. Wind-pollination is quite
common in grasses.

Pollination by water is quite rare in
flowering plants and is limited to about 30
genera, mostly monocotyledons. As against
this, you would recall that water is a regular
mode of transport for the male gametes among
the lower plant groups such as algae,
bryophytes and pteridophytes. It is believed,
particularly for some bryophytes and
pteridophytes, that their distribution is limited
because of the need for water for the transport
of male gametes and fertilisation. Some
examples of water pollinated plants are Vallisneria and Hydrilla which
grow in fresh water and several marine sea-grasses such as Zostera. Not
all aquatic plants use water for pollination. In a majority of aquatic plants
such as water hyacinth and water lily, the flowers emerge above the level
of water and are pollinated by insects or wind as in most of the land
plants. In Vallisneria, the female flower reach the surface of water by the
long stalk and the male flowers or pollen grains are released on to the
surface of water. They are carried passively by water currents (Figure
1.11a); some of them eventually reach the female flowers and the stigma.
In another group of water pollinated plants such as seagrasses, female
flowers remain submerged in water and the pollen grains are released
inside the water. Pollen grains in many such species are long, ribbon like
and they are carried passively inside the water; some of them reach the
stigma and achieve pollination. In most of the water-pollinated species,
pollen grains are protected from wetting by a mucilaginous covering.
Both wind and water pollinated flowers are not very colourful and do
not produce nectar. What would be the reason for this?

Majority of flowering plants use
a range of animals as pollinating
agents. Bees, butterflies, flies,
beetles, wasps, ants, moths, birds
(sunbirds and humming birds) and
bats are the common pollinating
agents. (Figure 1.11b). Among the
animals, insects, particularly bees
are the dominant biotic pollinating
agents. Even larger animals such
as some primates (lemurs), arboreal
(tree-dwelling) rodents, or even
reptiles (gecko lizard and garden
lizard) have also been reported as
pollinators in some species.
Often flowers of animal-
pollinated plants are specifically
adapted for a particular species of
animal.

Majority of insect-pollinated
flowers are large, colourful, fragrant
and rich in nectar. When the flowers
are small, a number of flowers are
clustered into an inflorescence to
make them conspicuous. Animals
are attracted to flowers by colour
and/or fragrance. The flowers
pollinated by flies and beetles
secrete foul odours to attract these
animals. To sustain animal visits,
the flowers have to provide rewards
to the animals. Nectar and pollen
grains are the usual floral rewards.
For harvesting the reward(s) from
the flower the animal visitor comes
in contact with the anthers and the
stigma. The body of the animal gets
a coating of pollen grains, which are
generally sticky in animal pollinated flowers. When the animal carrying
pollen on its body comes in contact with the stigma, it brings about
pollination.
In some species floral rewards are in providing safe places to lay eggs;
an example is that of the tallest flower of Amorphophallus (the flower
itself is about 6 feet in height). A similar relationship exists between a
species of moth and the plant Yucca where both species – moth and the

plant – cannot complete their life cycles without each other. The moth
deposits its eggs in the locule of the ovary and the flower, in turn, gets
pollinated by the moth. The larvae of the moth come out of the eggs as
the seeds start developing.
Why don’t you observe some flowers of the following plants (or any
others available to you): Cucumber, Mango, Peepal, Coriander, Papaya,
Onion, Lobia, Cotton, Tobacco, Rose, Lemon, Eucalyptus, Banana? Try to
find out which animals visit them and whether they could be
pollinators.You’ll have to patiently observe the flowers over a few days
and at different times of the day. You could also try to see whether there
is any correlation in the characteristics of a flower to the animal that
visits it. Carefully observe if any of the visitors come in contact with the
anthers and the stigma as only such visitors can bring about pollination.
Many insects may consume pollen or the nectar without bringing about
pollination. Such floral visitors are referred to as pollen/nectar robbers.
You may or may not be able to identify the pollinators, but you will surely
enjoy your efforts!

Outbreeding Devices : Majority of flowering plants produce hermaphrodite
flowers and pollen grains are likely to come in contact with the stigma of
the same flower. Continued self-pollination result in inbreeding depression.
Flowering plants have developed many devices to discourage self-
pollination and to encourage cross-pollination. In some species, pollen
release and stigma receptivity are not synchronised. Either the pollen is
released before the stigma becomes receptive or stigma becomes receptive
much before the release of pollen. In some other species, the anther and
stigma are placed at different positions so that the pollen cannot come in
contact with the stigma of the same flower. Both these devices prevent
autogamy. The third device to prevent inbreeding is self-incompatibility.
This is a genetic mechanism and prevents self-pollen (from the same flower
or other flowers of the same plant) from fertilising the ovules by inhibiting
pollen germination or pollen tube growth in the pistil. Another device to
prevent self-pollination is the production of unisexual flowers. If both male
and female flowers are present on the same plant such as castor and maize
(monoecious), it prevents autogamy but not geitonogamy. In several species
such as papaya, male and female flowers are present on different plants,
that is each plant is either male or female (dioecy). This condition prevents
both autogamy and geitonogamy.

Pollen-pistil Interaction : Pollination does not guarantee the transfer
of the right type of pollen (compatible pollen of the same species as the
stigma). Often, pollen of the wrong type, either from other species or from
the same plant (if it is self-incompatible), also land on the stigma. The
pistil has the ability to recognise the pollen, whether it is of the right type
(compatible) or of the wrong type (incompatible). If it is of the right type,
the pistil accepts the pollen and promotes post-pollination events that

leads to fertilisation. If the pollen is of the wrong type, the pistil rejects the
pollen by preventing pollen germination on the stigma or the pollen tube
growth in the style. The ability of the pistil to recognise the pollen followed
by its acceptance or rejection is the result of a continuous dialogue
between pollen grain and the pistil. This dialogue is mediated by chemical
components of the pollen interacting with those of the pistil. It is only in
recent years that botanists have been able to identify some of the pollen
and pistil components and the interactions leading to the recognition,
followed by acceptance or rejection.
As mentioned earlier, following compatible pollination, the pollen grain
germinates on the stigma to produce a pollen tube through one of the
germ pores (Figure 1.12a). The contents of the pollen grain move into the

pollen tube. Pollen tube grows through the tissues of the stigma and
style and reaches the ovary (Figure 1.12b, c). You would recall that in
some plants, pollen grains are shed at two-celled condition (a vegetative
cell and a generative cell). In such plants, the generative cell divides and
forms the two male gametes during the growth of pollen tube in the stigma.
In plants which shed pollen in the three-celled condition, pollen tubes
carry the two male gametes from the beginning. Pollen tube, after reaching
the ovary, enters the ovule through the micropyle and then enters one of
the synergids through the filiform apparatus (Figure 1.12d, e). Many recent
studies have shown that filiform apparatus present at the micropylar part
of the synergids guides the entry of pollen tube. All these events–from
pollen deposition on the stigma until pollen tubes enter the ovule–are
together referred to as pollen-pistil interaction. As pointed out earlier,
pollen-pistil interaction is a dynamic process involving pollen recognition
followed by promotion or inhibition of the pollen. The knowledge gained
in this area would help the plant breeder in manipulating pollen-pistil
interaction, even in incompatible pollinations, to get desired hybrids.
You can easily study pollen germination by dusting some pollen from
flowers such as pea, chickpea, Crotalaria, balsam and Vinca on a glass slide
containing a drop of sugar solution (about 10 per cent). After about 15–30
minutes, observe the slide under the low power lens of the microscope. You
are likely to see pollen tubes coming out of the pollen grains.
A breeder is interested in crossing different species and often genera
to combine desirable characters to produce commercially ‘superior’
varieties. Artificial hybridisation is one of the major approaches of crop
improvement programme. In such crossing experiments it is important
to make sure that only the desired pollen grains are used for pollination
and the stigma is protected from contamination (from unwanted pollen).
This is achieved by emasculation and bagging techniques.
If the female parent bears bisexual flowers, removal of anthers from
the flower bud before the anther dehisces using a pair of forceps is
necessary. This step is referred to as emasculation. Emasculated flowers
have to be covered with a bag of suitable size, generally made up of butter
paper, to prevent contamination of its stigma with unwanted pollen. This
process is called bagging. When the stigma of bagged flower attains
receptivity, mature pollen grains collected from anthers of the male parent
are dusted on the stigma, and the flowers are rebagged, and the fruits
allowed to develop.
If the female parent produces unisexual flowers, there is no need for
emasculation. The female flower buds are bagged before the flowers open.
When the stigma becomes receptive, pollination is carried out using the
desired pollen and the flower rebagged.
Ration

1.3 DOUBLE FERTILISATION
After entering one of the synergids, the pollen tube releases the two male
gametes into the cytoplasm of the synergid. One of the male gametes moves
towards the egg cell and fuses with its nucleus thus completing the
syngamy. This results in the formation of a diploid cell, the zygote. The
other male gamete moves towards the two polar nuclei located in the central
cell and fuses with them to produce a triploid primary endosperm nucleus
(PEN) (Figure 1.13a). As this involves the fusion of three haploid nuclei it
is termed triple fusion. Since two types of fusions, syngamy and triple
fusion take place in an embryo sac the phenomenon is termed double
fertilisation, an event unique to flowering plants. The central cell after
triple fusion becomes the primary endosperm cell (PEC) and develops
into the endosperm while the zygote develops into an embryo.

1.4 POST-FERTILISATION : STRUCTURES AND EVENTS
Following double fertilisation, events of endosperm and embryo
development, maturation of ovule(s) into seed(s) and ovary into fruit, are
collectively termed post-fertilisation events.

1.4.1 Endosperm
Endosperm development precedes embryo development. Why? The
primary endosperm cell divides repeatedly and forms a triploid

endosperm tissue. The cells of this tissue are filled with
reserve food materials and are used for the nutrition of
the developing embryo. In the most common type of
endosperm development, the PEN undergoes successive
nuclear divisions to give rise to free nuclei. This stage of
endosperm development is called free-nuclear endosperm.
Subsequently cell wall formation occurs and the
endosperm becomes cellular. The number of free nuclei
formed before cellularisation varies greatly. The coconut
water from tender coconut that you are familiar with, is
nothing but free-nuclear endosperm (made up of
thousands of nuclei) and the surrounding white kernel is
the cellular endosperm.
Endosperm may either be completely consumed by the
developing embryo (e.g., pea, groundnut, beans) before seed
maturation or it may persist in the mature seed (e.g. castor
and coconut) and be used up during seed germination. Split
open some seeds of castor, peas, beans, groundnut, fruit of
coconut and look for the endosperm in each case. Find out
whether the endosperm is persistent in cereals – wheat, rice
and maize.

1.4.2 Embryo
Embryo develops at the micropylar end of the embryo sac where
the zygote is situated. Most zygotes divide only after certain
amount of endosperm is formed. This is an adaptation to
provide assured nutrition to the developing embryo. Though
the seeds differ greatly, the early stages of embryo development
(embryogeny) are similar in both monocotyledons and
dicotyledons. Figure 1.13 depicts the stages of embryogeny in
a dicotyledonous embryo. The zygote gives rise to the
proembryo and subsequently to the globular, heart-shaped
and mature embryo.
A typical dicotyledonous embryo (Figure 1.14a), consists
of an embryonal axis and two cotyledons. The portion of
embryonal axis above the level of cotyledons is the epicotyl,
which terminates with the plumule or stem tip. The cylindrical
portion below the level of cotyledons is hypocotyl that
terminates at its lower end in the radicle or root tip. The root
tip is covered with a root cap.
Embryos of monocotyledons (Figure 1.14 b) possess only
one cotyledon. In the grass family the cotyledon is called
scutellum that is situated towards one side (lateral) of the
embryonal axis. At its lower end, the embryonal axis has the

radical and root cap enclosed in an undifferentiated sheath called
coleorrhiza. The portion of the embryonal axis above the level of
attachment of scutellum is the epicotyl. Epicotyl has a shoot apex and a
few leaf primordia enclosed in a hollow foliar structure, the coleoptile.
Soak a few seeds in water (say of wheat, maize, peas, chickpeas,
ground nut) overnight. Then split the seeds and observe the various
parts of the embryo and the seed.

1.4.3 Seed
In angiosperms, the seed is the final product of sexual reproduction. It is
often described as a fertilised ovule. Seeds are formed inside fruits. A
seed typically consists of seed coat(s), cotyledon(s) and an embryo axis.
The cotyledons (Figure 1.15a) of the embryo are simple structures,
generally thick and swollen due to storage of food reserves (as in legumes).
Mature seeds may be non-albuminous or ex-albuminous. Non-
albuminous seeds have no residual endosperm as it is completely
consumed during embryo development (e.g., pea, groundnut).
Albuminous seeds retain a part of endosperm as it is not completely used
up during embryo development (e.g., wheat, maize, barley, castor).
Occasionally, in some seeds such as black pepper and beet, remnants of
nucellus are also persistent. This residual, persistent nucellus is the
perisperm.
Integuments of ovules harden as tough protective seed coats
(Figure 1.15a). The micropyle remains as a small pore in the seed coat.
This facilitates entry of oxygen and water into the seed during germination.
As the seed matures, its water content is reduced and seeds become
relatively dry (10-15 per cent moisture by mass). The general metabolic
activity of the embryo slows down. The embryo may enter a state of
inactivity called dormancy, or if favourable conditions are available
(adequate moisture, oxygen and suitable temperature), they germinate.
As ovules mature into seeds, the ovary develops into a fruit, i.e., the
transformation of ovules into seeds and ovary into fruit proceeds
simultaneously. The wall of the ovary develops into the wall of fruit called
pericarp. The fruits may be fleshy as in guava, orange, mango, etc., or
may be dry, as in groundnut, and mustard, etc. Many fruits have evolved
mechanisms for dispersal of seeds. Recall the classification of fruits and
their dispersal mechanisms that you have studied in an earlier class. Is
there any relationship between number of ovules in an ovary and the
number of seeds present in a fruit?
In most plants, by the time the fruit develops from the ovary, other
floral parts degenerate and fall off. However, in a few species such as apple,
strawberry, cashew, etc., the thalamus also contributes to fruit formation.
Such fruits are called false fruits (Figure 1.15b). Most fruits however
develop only from the ovary and are called true fruits. Although in most
of the species, fruits are the results of fertilisation, there are a few species

in which fruits develop without fertilisation. Such fruits are called
parthenocarpic fruits. Banana is one such example. Parthenocarpy can
be induced through the application of growth hormones and such fruits
are seedless.
Seeds offer several advantages to angiosperms. Firstly, since
reproductive processes such as pollination and fertilisation are
independent of water, seed formation is more dependable. Also seeds have
better adaptive strategies for dispersal to new habitats and help the species

to colonise in other areas. As they have sufficient food reserves, young
seedlings are nourished until they are capable of photosynthesis on their
own. The hard seed coat provides protection to the young embryo. Being
products of sexual reproduction, they generate new genetic combinations
leading to variations.
Seed is the basis of our agriculture. Dehydration and dormancy of
mature seeds are crucial for storage of seeds which can be used as food
throughout the year and also to raise crop in the next season. Can you
imagine agriculture in the absence of seeds, or in the presence of seeds
which germinate straight away soon after formation and cannot be stored?
How long do the seeds remain alive after they are dispersed? This
period again varies greatly. In a few species the seeds lose viability within
a few months. Seeds of a large number of species live for several years.
Some seeds can remain alive for hundreds of years. There are several
records of very old yet viable seeds. The oldest is that of a lupine, Lupinus
arcticus excavated from Arctic Tundra. The seed germinated and flowered
after an estimated record of 10,000 years of dormancy. A recent record of
2000 years old viable seed is of the date palm, Phoenix dactylifera
discovered during the archeological excavation at King Herod’s palace
near the Dead Sea.
After completing a brief account of sexual reproduction of flowering
plants it would be worth attempting to comprehend the enormous
reproductive capacity of some flowering plants by asking the following
questions: How many eggs are present in an embryo sac? How many
embryo sacs are present in an ovule? How many ovules are present in
an ovary? How many ovaries are present in a typical flower? How many
flowers are present on a tree? And so on…
Can you think of some plants in which fruits contain very large
number of seeds. Orchid fruits are one such category and each fruit
contain thousands of tiny seeds. Similar is the case in fruits of some
parasitic species such as Orobanche and Striga. Have you seen a tiny
seed of Ficus? How large is the tree of Ficus developed from that tiny
seed. How many billions of seeds does each Ficus tree produce? Can
you imagine any other example in which such a tiny structure can
produce such a large biomass over the years?

1.5 APOMIXIS AND POLYEMBRYONY
Although seeds, in general are the products of fertilisation, a few flowering
plants such as some species of Asteraceae and grasses, have evolved a
special mechanism, to produce seeds without fertilisation, called apomixis.
What is fruit production without fertilisation called? Thus, apomixis is a
form of asexual reproduction that mimics sexual reproduction. There are
several ways of development of apomictic seeds. In some species, the
diploid egg cell is formed without reduction division and develops into
the embryo without fertilisation. More often, as in many Citrus and Mango

varieties some of the nucellar cells surrounding the embryo sac start
dividing, protrude into the embryo sac and develop into the embryos. In
such species each ovule contains many embryos. Occurrence of more
than one embryo in a seed is referred to as polyembryony. Take out
some seeds of orange and squeeze them. Observe the many embryos of
different sizes and shapes from each seed. Count the number of embryos
in each seed. What would be the genetic nature of apomictic embryos?
Can they be called clones?
Hybrid varieties of several of our food and vegetable crops are being
extensively cultivated. Cultivation of hybrids has tremendously increased
productivity. One of the problems of hybrids is that hybrid seeds have
to be produced every year. If the seeds collected from hybrids are sown,
the plants in the progeny will segregate and do not maintain hybrid
characters. Production of hybrid seeds is costly and hence the cost of
hybrid seeds become too expensive for the farmers. If these hybrids are
made into apomicts, there is no segregation of characters in the hybrid
progeny. Then the farmers can keep on using the hybrid seeds to raise
new crop year after year and he does not have to buy hybrid seeds every
year. Because of the importance of apomixis in hybrid seed industry,
active research is going on in many laboratories around the world to
understand the genetics of apomixis and to transfer apomictic genes
into hybrid varieties.

SUMMARY
Flowers are the seat of sexual reproduction in angiosperms. In the flower,
androecium consisting of stamens represents the male reproductive
organs and gynoecium consisting of pistils represents the female
reproductive organs.
A typical anther is bilobed, dithecous and tetrasporangiate. Pollen
grains develop inside the microsporangia. Four wall layers, the
epidermis, endothecium, middle layers and the tapetum surround the
microsporangium. Cells of the sporogenous tissue lying in the centre of
the microsporangium, undergo meiosis (microsporogenesis) to form
tetrads of microspores. Individual microspores mature into pollen grains.
Pollen grains represents the male gametophytic generation. The
pollen grains have a two-layered wall, the outer exine and inner intine.
The exine is made up of sporopollenin and has germ pores. Pollen grains
may have two cells (a vegetative cell and generative cell) or three cells (a
vegetative cell and two male gametes) at the time of shedding.
The pistil has three parts – the stigma, style and the ovary. Ovules
are present in the ovary. The ovules have a stalk called funicle, protective
integument(s), and an opening called micropyle. The central tissue is
the nucellus in which the archesporium differentiates. A cell of the
archesporium, the megaspore mother cell divides meiotically and one of
the megaspores forms the embryo sac (the female gametophyte). The
mature embryo sac is 7-celled and 8-nucleate. At the micropylar end is

the egg apparatus consisting of two synergids and an egg cell. At the
chalazal end are three antipodals. At the centre is a large central cell
with two polar nuclei.
Pollination is the mechanism to transfer pollen grains from the
anther to the stigma. Pollinating agents are either abiotic (wind and
water) or biotic (animals).
Pollen-pistil interaction involves all events from the landing of pollen
grains on the stigma until the pollen tube enters the embryo sac (when
the pollen is compatible) or pollen inhibition (when the pollen is
incompatible). Following compatible pollination, pollen grain germinates
on the stigma and the resulting pollen tube grow through the style,
enter the ovules and finally discharges two male gametes in one of the
synergids. Angiosperms exhibit double fertilisation because two fusion
events occur in each embryo sac, namely syngamy and triple fusion.
The products of these fusions are the diploid zygote and the triploid
primary endosperm nucleus (in the primary endosperm cell). Zygote
develops into the embryo and the primary endosperm cell forms the
endosperm tissue. Formation of endosperm always precedes
development of the embryo.
The developing embryo passes through different stages such as
the proembryo, globular and heart-shaped stages before maturation.
Mature dicotyledonous embryo has two cotyledons and an embryonal
axis with epicotyl and hypocotyl. Embryos of monocotyledons have a
single cotyledon. After fertilisation, ovary develops into fruit and ovules
develop into seeds.
A phenomenon called apomixis is found in some angiosperms,
particularly in grasses. It results in the formation of seeds without
fertilisation. Apomicts have several advantages in horticulture and
agriculture.
Some angiosperms produce more than one embryo in their seed.
This phenomenon is called polyembryony.

EXERCISES

1. Name the parts of an angiosperm flower in which development of male
   and female gametophyte take place.
2. Differentiate between microsporogenesis and megasporogenesis. Which
   type of cell division occurs during these events? Name the structures
   formed at the end of these two events.
3. Arrange the following terms in the correct developmental sequence:
   Pollen grain, sporogenous tissue, microspore tetrad, pollen mother cell,
   male gametes.
4. With a neat, labelled diagram, describe the parts of a typical angiosperm
   ovule.
5. What is meant by monosporic development of female gametophyte?
6. With a neat diagram explain the 7-celled, 8-nucleate nature of the female
   gametophyte.
7. What are chasmogamous flowers? Can cross-pollination occur in
   cleistogamous flowers? Give reasons for your answer.
8. Mention two strategies evolved to prevent self-pollination in flowers.
9. What is self-incompatibility? Why does self-pollination not lead to seed
   formation in self-incompatible species?
10. What is bagging technique? How is it useful in a plant breeding
    programme?
11. What is triple fusion? Where and how does it take place? Name the
    nuclei involved in triple fusion.
12. Why do you think the zygote is dormant for sometime in a fertilised
    ovule?
13. Differentiate between:
    (a) hypocotyl and epicotyl;
    (b) coleoptile and coleorrhiza;
    (c) integument and testa;
    (d) perisperm and pericarp.
14. Why is apple called a false fruit? Which part(s) of the flower forms the
    fruit?
15. What is meant by emasculation? When and why does a plant breeder
    employ this technique?
16. If one can induce parthenocarpy through the application of growth
    substances, which fruits would you select to induce parthenocarpy
    and why?
17. Explain the role of tapetum in the formation of pollen-grain wall.
18. What is apomixis and what is its importance?